RCA 19V400TV User Manual
10
Connect the VHF 75 ohm cable and UHF 300 ohm twin-lead wire to the Combiner (not supplied). Attach the
Combiner to the Antenna Jack.
Combiner to the Antenna Jack.
If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna
system. If you are using a cable TV service (CATV), see page 11 for Cable TV connections.
system. If you are using a cable TV service (CATV), see page 11 for Cable TV connections.
Connect the UHF 300 ohm twin-lead wire to the Combiner (not supplied). Connect the VHF 300 ohm twin-lead wire
to the 300-75 ohm Matching Transformer. Attach the Transformer to the Combiner, then attach the Combiner to the
Antenna Jack.
to the 300-75 ohm Matching Transformer. Attach the Transformer to the Combiner, then attach the Combiner to the
Antenna Jack.
ANTENNA CONNECTIONS
Connect the 75 ohm cable from the combination VHF/UHF antenna to the Antenna Jack.
If your combination VHF/UHF antenna has a 300 ohm twin-lead wire, the use of the 300-75 ohm Matching
Transformer may be necessary.
If your combination VHF/UHF antenna has a 300 ohm twin-lead wire, the use of the 300-75 ohm Matching
Transformer may be necessary.
Combination VHF/UHF Antenna (Single 75 ohm cable or 300 ohm twin-lead wire)
Combination VHF/UHF Antenna (Separate VHF and UHF 300 ohm twin-lead wires)
Separate VHF/UHF Antennas (75 ohm VHF cable and 300 ohm UHF twin-lead wires)
75 ohm
Coaxial
Cable
Coaxial
Cable
300-75 ohm Matching Transformer
Antenna Jack
Antenna Jack
300-75 ohm Matching
Transformer
Transformer
UHF 300 ohm
VHF 300 ohm
Antenna Jack
Combiner
UHF 300 ohm
VHF 75 ohm
Antenna Jack
Combiner
5J70101B E P09-16
4/11/03, 5:39 PM
10