Pelco TLR2024 User Manual

Page of 48
46
Pelco Manual C650M (12/98)
13.0  SPECIFICATIONS
ELECTRICAL
Power Source:
100-230 VAC, 50/60Hz. (The included power cord is used for
120 VAC, 60 Hz)
Power
Consumption:
Approximately 20 watts
Rating:
ALM/CALL/
MODE
Active: “Low” level, maximum current 50 mA (+5 VDC)/10 mA
(+24 VDC)
Non-active: Open, maximum voltage +24 VDC.
SET/RST/REC
Active: When terminals are short-circuited or “Low” level volt-
age applied
Non-active: Open
CLK
Recording: A pulse of the frequency division ratio selected in
REAR TERMINAL menu
VIDEO
Tape Format:
VHS 1/2" width high-density video cassette tape
Television System: 525 lines, 60 field NTSC-type color system
Video Recording
System:
4 rotary heads, azimuth helical scanning system
Luminance Signal: Frequency modulation recording
Color Signal:
Low frequency conversion, sub-carrier phase shift recording
Audio Track:
1 track
Tape Speed and Recording Time
(with T-120 cassette):
Record Mode
Record Time
Record Time
Field (Picture)
Tape Drive
Audio Recording
(T-120 Tape)
(T-160 Tape)
Recording Rate
Mode
Capability
2H
2 Hrs.
2 Hrs.40 Mins.
60 Fields/Sec
Continuous
Yes
6H
6 Hrs.
8 Hrs
60 Fields/Sec
Continuous
Yes
L12H
14 Hrs.
18 Hrs.40 Mins.
8.5 Fields/Sec
Continuous
Yes
L24H
26 Hrs.
34 Hrs.40 Mins.
4.6 Fields/Sec
Continuous (Slow)
Yes
Fast Forward/
Rewind Time:
Approximately 140 seconds with T-120 cassette
Horizontal
Resolution:
More than 330 lines (black & white)
More than 240 lines (color)
Audio Frequency
Response:
70Hz- 7kHz (2H mode)
Signal-to-Noise
Ratio:
Video: better than 42 dB
Audio: better than 43 dB
Alarm Recording
Time:
Timed: 15 sec/30 sec/45 sec/1 min/2 min/5 min/10 min
Manual 1: Until the alarm reset switch is switched on
Manual 2: Until the alarm set switch is switched off