Pelco C1301M User Manual
C1301M (6/05)
25
Quick Programming Guide
(See Page 9)
ACTIVATE AUX COMMAND (23X DAY/NIGHT CAMERA)
Motion detection can be programmed to trigger an auxiliary command when motion is detected.
The following are the settings for ACTIVATE AUX:
The following are the settings for ACTIVATE AUX:
OFF (default)
Motion detection will not trigger an AUX command.
1
Triggers a command to AUX 1.
2
Triggers a command to AUX 2.
AUX TIME (23X DAY/NIGHT CAMERA)
Aux time is the length of time the auxiliary will remain on after motion is detected. Available
settings for AUX TIME are 1 through 60 seconds.
settings for AUX TIME are 1 through 60 seconds.
EXIT
LANGUAGE
ENGLISH
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<UNIT SETTINGS>
<DISPLAY SETUP>
<UNIT SETTINGS>
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
CYCLE CAMERA POWER
REBOOT SYSTEM
PELCO EXSITE EHXM
<CAMERA>
<OTHER>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<WINDOW BLANKING>
<ALARMS>
<WIPER>
<AUX>
<CLEAR>
<PASSWORD>
<OTHER>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<WINDOW BLANKING>
<ALARMS>
<WIPER>
<AUX>
<CLEAR>
<PASSWORD>
BACK
EXIT
EXIT
UNIT SETTINGS
PRESET NUMBER
1
***PRESET NOT DEFINED***
<EDIT PREST LABEL>
<EDIT PRESET SCENE>
<EDIT CAMERA SETTINGS>
<MOTION DETECTION>*
<EDIT PRESET SCENE>
<EDIT CAMERA SETTINGS>
<MOTION DETECTION>*
<CLEAR PRESET>
<CLEAR CAMERA SETTINGS>
<CLEAR CAMERA SETTINGS>
BACK
EXIT
EXIT
REFERENCE INFORMATION
ZOOM
ZOOM
--
CUSTOM CAMERA SETTINGS
--
PRESETS
MOTION DETECTION ENABLED
OFF
<EDIT DETECTION AREAS>
ACTIVATE AUX
OFF
AUX TIME (SECS)
0
BACK
EXIT
EXIT
MOTION DETECTION*
* Available only with the 23X day/night camera.