Samsung NBNH User Manual
32
Using "PCoIP"
2
2 Using "PCoIP"
2.4
"PCoIP"
2.4.1
On Screen Display (OSD)
The On Screen Display (OSD) local GUI will appear on the client when the device is powered on and a
PCoIP session is not in progress. The OSD lets the user connect to a host device through the
Connect
window.
The
Connect
window allows access to the
Options
page which provides some of the functions provided
by the Administrative Web Interface.
To access the
Options
page, click the
Options
menu on the
Connect
window.
2.4.2
Connect Screen
The
Connect
window will appear during startup except when the client is configured for a managed
startup or auto-reconnect.
You can change the logo that appears above the
Connect
button by uploading a replacement image
through the Administrative Web Interface
Upload
menu.
The
Network
icon at the bottom right of the
Connect
window shows the status of the network
connection.
A red X over the network icon means either the network is not properly connected or the connection is
still being initialized (i.e., during client boot-up).
Figure 2-1: Network Not Ready (Detail)
Users must wait until the Network Ready icon appears.
Figure 2-2: Network Ready (Detail)
Connect Button
Click the
Connect
button to start a PCoIP session. When the PCoIP connection is pending, the OSD
local GUI displays a "Connection Pending" message. When the connection is established, the OSD local
GUI will disappear and the session image will appear.