NuTone 846 Leaflet

Refer to Figure 1.
Attach Wall Cap to outside wall with
screws through four slots on side 
of flanges.

Refer to Figure 2.
Wall Cap can be set back into wall 2"
from outside face of brick and grouted
into place or can be placed flush with
surface of brick and anchored into
place with four lead anchors.

Refer to Figure 3.
Insert 8" round duct into lip on rear
wall cap.
NOTE: 

Remove tape and be certain

louvers operate freely.

Refer to Figure 1.
Attach Wall Cap to outside wall with
screws through four slots on side 
of flanges.

Refer to Figure 2.
Wall Cap can be set back into wall 2"
from outside face of brick and grouted
into place or can be placed flush with
surface of brick and anchored into
place with four lead anchors.

Refer to Figure 3.
Insert 8" round duct into lip on rear
wall cap.
NOTE: 

Remove tape and be certain

louvers operate freely.