Premier Mounts Rotary series User Manual
Installation
Instructions
Page
9
After loosening the tension bolts, be sure that the
nose piece is held together tightly before rotating.
nose piece is held together tightly before rotating.
RFM
6.
Lower the universal bracket bar with attached
display into the cradle (as shown to the left).
Nylon
Sleeve
Sleeve
Knurl Knob Mounting Point/M6 x 12mm Security Head and
M6 Lock Washer Mounting Point.
M6 Lock Washer Mounting Point.
7.
Insert an M6 Knurl Knob/M6 x 12mm Security
Head and M6 Lock Washer into the knurl knob/
security screw mounting point and tighten.
To access the knurl knob/security screw
location while the display is attached, the
RFM must be rotated to the “portrait”
position (vertical position
location while the display is attached, the
RFM must be rotated to the “portrait”
position (vertical position
8.
Tighten the two (2) Phillips head screws (located
on the side of the mounting block) once the final
position is attained.