Sennheiser SK 300 User Manual
Using the bodypack transmitter
12
To switch the bodypack transmitter
off
:
왘
If necessary, deactivate the lock mode (see next
chapter).
chapter).
To switch the bodypack transmitter on and to
deactivate
the RF signal on switch-on
(offline operation):
To
activate
the
RF signal
:
Deactivating the lock mode temporarily
You can activate or deactivate the automatic lock mode via
the “
the “
Auto Lock
If the lock mode is activated, you have to temporarily
deactivate it In order to be able to operate the bodypack
transmitter:
deactivate it In order to be able to operate the bodypack
transmitter:
왘
Keep the
ON
/
OFF
button
pressed until “
OFF
”
appears on the display panel. The red
ON
LED
goes off and the display panel turns off.
When in the operating menu, pressing the
ON
/
OFF
button
will cancel your entry (ESC function)
and return you to the current standard display.
왘
Keep the
ON
/
OFF
button pressed until “
RF Mute
On?
” appears on the display panel.
왘
Press the
SET
button.
The transmission frequency is displayed but the
bodypack transmitter does not transmit an RF
signal. The transmission icon
bodypack transmitter does not transmit an RF
signal. The transmission icon
When the pilot tone function is activated on both
bodypack transmitter and receiver, “
bodypack transmitter and receiver, “
RF Mute
”
appears on the receiver’s display panel.
Use this function to save battery power or to
prepare a bodypack transmitter for use during live
operation without causing interference to existing
transmission links.
prepare a bodypack transmitter for use during live
operation without causing interference to existing
transmission links.
왘
Briefly press the
ON
/
OFF
button.
“
RF Mute Off?
” appears on the display panel.
왘
Press the
SET
button.
The transmission icon
is displayed again.
왘
Press the
SET
button.
“
Locked
” appears on the display panel.
왘
Press the rocker button.
“
“
Unlock?
” appears on the display panel.
ON/OFF
ON/OFF
MHz
531.375
ew300 G3
MUTE
P
AF
햵
ON/OFF