Insignia NS-AC1200 Leaflet

Warning: If your device does not work, immediately unplug 
the adapter, then check the voltage and polarity settings. Do 
not attempt to charge multiple devices at the same time 
through the tip and USB connections.

•  Connect the adapter to your device, then connect it 

to a power outlet. Use or charge your device as usual.

  OR
•  Connect a USB charging cable from the adapter to 

your device, then connect the adapter to a power 
outlet. Use or charge your device as usual.

My device isn’t working.
•  Immediately unplug the adapter.
•  Check the polarity of your adapter and make sure it 

matches the polarity of the device you want to 
charge.

•  Make sure that your device requires less than 

1300mA (1.3A) of current (or 2100mA (2.1A) for 5V 
connection).

•  Make sure that the voltage selector is set to the 

correct voltage.

•  Make sure that you have selected the correct tip.
•  Do not connect a device to the USB port and tip at 

the same time.

My adapter is hot.
•  It is normal for an adapter to feel warm during use. 

Make sure that it is placed in a well-ventilated area.

•  If your adapter feels abnormally hot, check your 

adapter’s settings and make sure that it is 
compatible with your device.

•  Input: 120V AC
•  Output: 3, 4.5, 6, 7.5, 9, or 12V DC 1300mA, or 5V 

DC 2.1A 

V1 ENGLISH 14-0200

Caution: Changes or modifications not expressly approved 
by the part responsible for compliance could void the user’s 
authority to operate the equipment.
This equipment has been tested and found to comply with 
the limits for a Class B digital device, pursuant to part 15 of 
the FCC Rules. These limits are designed to provide reasonable 
protection against harmful interference in a residential 
installation. This equipment generates, uses and can radiate 
radio frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful 
interference to radio communications. However, there is no 
guarantee that interference will not occur in a particular 
installation. If this equipment does cause harmful 
interference to radio or television reception, which can be 
determined by turning the equipment off and on, the user is 
encouraged to try to correct the interference by one or more 
of the following measures:
•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and 

receiver.

•  Connect the equipment into an outlet on a circuit different 

from that to which the receiver is connected.

•  Consult the dealer or an experienced radio/TV technician 

for help.

This device complies with part 15 of the FCC Rules. Operation 
is subject to the following two conditions: (1) This device may 
not cause harmful interference, and (2) this device must 
accept any interference received, including interference that 
may cause undesired operation.

CAN ICES-3 B/NMB-3 B

Visit www.insigniaproducts.com for details.

For customer service, call 1-877-467-4289 (U.S. and 
Canada) or 01-800-926-3000 (Mexico)
www.insigniaproducts.com

INSIGNIA is a trademark of Best Buy and its affiliated companies.
Registered in some countries.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2014 Best Buy. All rights reserved.
Made in China