Emerson 2200S User Manual
140
Micro Motion
®
Model 2200S Transmitters
Using the 375 Field Communicator
E.3
Connecting to a transmitter
You can connect the Communicator to the transmitter’s HART clips or to a point on a HART network.
Note: The HART clips on the face of the transmitter are connected to the transmitter’s mA/HART
terminals. You may connect directly to the mA/HART terminals if you have removed the user interface
module.
terminals. You may connect directly to the mA/HART terminals if you have removed the user interface
module.
Note: If you are using the mA/HART terminals to report a process variable and also for HART
communications, see the transmitter installation manual for wiring diagrams.
communications, see the transmitter installation manual for wiring diagrams.
E.3.1
Connecting to HART clips
To connect the Communicator to the transmitter’s HART clips:
1. Remove the user interface cover (see Section C.3).
2. Connect the Communicator leads to the HART clips on the face of the transmitter. The
connection is polarity-insensitive. See Figure E-1.
3. The Communicator must be connected across a resistance of 250–600
Ω. Add resistance to
the connection. See Figure E-1.
Figure E-1
Connecting to HART clips
Communicator
250–600
Ω resistance
HART clips
Connection is
polarity-insensitive