Emerson 2200S User Manual

51

The operational parameters control the behavior of the transmitter and flowmeter system. The 
following parameters can be configured:

•

Display parameters – see Section 5.2

•

Fault handling parameters – see Section 5.3

In addition, this chapter provides information on sensor parameters (see Section 5.4) and device 
parameters (see Section 5.5). These parameters do not affect measurement or operation, but may be 
useful for administration.

Before beginning configuration, ensure that you have made an administrative connection to the 
transmitter and that you are complying with all applicable safety requirements.

You can configure a variety of parameters to control display behavior and operator actions at the 
display.

The Update Period parameter controls how often the display is refreshed with current data. The 
default is 200 milliseconds; the range is 100 milliseconds to 10,000 milliseconds (10 seconds).

To configure Update Period:

•

Using the Communicator, select 

•

Using ProLink II, click 

.

•

Using the display, see Figure 2-14.

The display language can be set to English, French, German, or Spanish. Other languages may be 
available, depending on date of purchase.

To configure the display language:

•

Using the Communicator, select 

•

Using ProLink II, click 

.

•

Using the display, see Figure 2-14.