Pelco TW3004AR User Manual
10
C1667M (6/06)
APPLICATIONS
You can connect the TW3004AR active receiver to transmitters, such as the TW3001P passive
transceiver, and the TW3001AT active transmitter, and to Pelco UTP cameras, such as the CC3710/
CC3610 series. Although you can connect these products using an unshielded twisted pair Cat3 and
Cat5 cable, Cat5e and Cat 6 are recommended for the best video performance.
transceiver, and the TW3001AT active transmitter, and to Pelco UTP cameras, such as the CC3710/
CC3610 series. Although you can connect these products using an unshielded twisted pair Cat3 and
Cat5 cable, Cat5e and Cat 6 are recommended for the best video performance.
Always connect the UTP wires on the Cat cable from + to + and from – to –. For example, if you
connect the blue wire to the + on the TW3004AR make sure you connect the other end of the blue wire
to the + on the transmitter.
connect the blue wire to the + on the TW3004AR make sure you connect the other end of the blue wire
to the + on the transmitter.
Table A shows the maximum cable distance with Coaxitron or video only when connecting the
TW3004AR to a TW3001P passive transceiver with a particular type of Cat cable.
TW3004AR to a TW3001P passive transceiver with a particular type of Cat cable.
Table A.
Cable Distance with TW3001P
Cable Type
Maximum Distance
(with Coaxitron)
Maximum Distance
(video only)
Cat3
e
750 ft (229 meters)
1,500 ft (457 meters)
Cat5
e
750 ft (229 meters)
3,000 ft (914 meters)
Cat5e
750 ft (229 meters)
4,000 ft (1,219 meters)
Cat6
e
750 ft (229 meters)
4,000 ft (1,219 meters)
Table B.
Wire Gauge
Wire Gauge (minimum size)
Single Wire (solid)
24 AWG (0.25 mm
2
)
Stranded Wire (flexible)
24 AWG (1.0 mm
2
)