Pelco TW3004AR User Manual
C1667M (6/06)
7
Installation
The following parts are supplied:
1
Universal power supply (Part #PS04-1502-0512G)
1
Wall clip with screws and washers
1
Power connector 2-pin
1
UTP mating connector
1 Screwdriver
MOUNTING
The TW3004AR receiver is 3 rack units high and can be mounted into a fi ber rack, onto a wall using
a fiber wall mount kit or into the supplied wall clip.
a fiber wall mount kit or into the supplied wall clip.
USING A RACK
You can mount a TW3004AR into either an RK5000PS-3U (with power supply) or an RK5000-3U
(without power supply). For more mounting information, refer to the RK5000PS-3U/RK5000-3U Fiber
Rack Mount Chassis Installation manual.
(without power supply). For more mounting information, refer to the RK5000PS-3U/RK5000-3U Fiber
Rack Mount Chassis Installation manual.
USING WALL MOUNT KITS
The optional WM5001-3U wall mount base kit allows attachment of a single TW3004AR to a wall.
Up to two WM5001-3UEXP wall mount expansion kits can be used to allow attachment of two
additional receivers to the wall. For more information, refer to the Fiber Wall Mount Kits Installation
manual.
Up to two WM5001-3UEXP wall mount expansion kits can be used to allow attachment of two
additional receivers to the wall. For more information, refer to the Fiber Wall Mount Kits Installation
manual.