Oregon Scientific SE188 User Manual

6

EN

• 

Press and hold 

 for 2 seconds. 

 will appear 

on the display when the keypad lock is on. 

The  tap  on  lens  feature  gives  you  easy  access  to  1  of  6 
preset modes:
•   Heart rate (HR)
•   Stopwatch (STW)
•   Smart Training Program (SMART)
•   Calorie measurement (CAL)
•   Lap timer (LAP)
•   Time
To set the tap on lens preset mode:
1.   In clock mode, press SET repeatedly until you reach the 

tap on lens “ON” display.

 2.   Press  and  hold  SET  to  enter  the  preset  modes 

selection.

3.   Press ST / SP / + or MEM / LAP / - to select the preset 

mode.

4.   Press SET to confirm.
To use the tap on lens:
Simply tap on the lens and your preset mode will display for 
10 seconds before returning to the previous screen.

 appears when the tap on lens is activated and flashes 

when the preset display is shown.

Press MODE to switch between the 5 operation modes: 
• 

Real-Time Clock 

• 

Alarm Clock 

• 

User Profile / Exercise Profile 

• 

Timer - SMART TRAINING PROGRAM 

• 

Stopwatch 

The modes are described in the sections that follow. 

 NOTE  You can run the SMART TRAINING PROGRAM or 
stopwatch in the background as you access other modes. 
The  icon  for  the  mode  that  is  running  will  flash  until  you 
switch back to that mode.  

The real-time clock is the default display for the watch. 
To set the real-time clock: 
1.  Press MODE to switch to Real-Time Clock Mode.

 

2.   Press and hold SET until the first setting flashes.