Precor P10 User Manual

Chapter

Assembling the Treadmill

Important: The instructions in the following procedures are

described from the perspective of a person standing

directly in

front of the equipment (that is, on the opposite side of the

control console from a person using the equipment). These

descriptions may not match the names of certain parts in the parts

list, because such parts are named relative to the back of the

equipment.

WARNING

You will need assistance to assemble this unit.

DO NOT attempt assembly by yourself.

To prepare the treadmill for assembly:
1. Have your assistant help place the shipping carton close

to the location where you plan to use the treadmill. Break

down the sidewalls of the shipping carton so that they lie

flat. Remove the loose contents of the carton.

CAUTION: Use safe lifting techniques throughout the

following steps. To prevent injury to yourself or damage to

the equipment, obtain appropriate assistance before

removing the unit from the pallet.

2. With the help of as many assistants as necessary, lift the

treadmill off of the pallet and roll it gently onto the floor.

3. Make sure that the power switch is OFF. Check the

ON/OFF power switch on the front of the treadmill. Place

the switch in the O (OFF) position. Make sure that the

treadmill is

not plugged into a power source.

Note: In the following step, do not roll the treadmill over

its power cord.

4. Lift the unit by placing hands on opposite sides of the rear

cross brace found under the treadmill’s running belt. Roll

the treadmill on its front wheels to the area where it will

be used.