GE 24914 User Manual

11

The Master Volume Feature allows you to select a 
single device (TV or audio receiver) that the volume 
control always controls. For example, the remote can 
be in TV mode while the volume buttons control the 
volume on your audio receiver instead of your TV. 

Enabling the Master Volume Feature
1.  Press and hold the 

SETUP button until 

the red indicator stays on 
(approximately 4 seconds) and then 
release the button.

2.  Press and release desired device 

button (

TV, DVD, SAT, AUX) for the 

device you wish to setup to control 
the volume.

3.  Press and release the 

MUTE button.

4.  Press and release the 

VOL      button. 

The red indicator will blink twice and 
then go off. 

To test the feature put the remote in 
another mode such as the TV mode if you 
programmed the audio receiver to be the 
Master Volume Device. Point the remote 
at the audio receiver, press and hold 
either the 

VOL      or the VOL     button. If 

the audio receiver volume changes then 
the remote is programmed correctly. If 
the TV volume changes and not the audio 
receiver, you will have to repeat the steps 
above and test again.

Disabling the Master Volume Feature
1.  Press and hold the 

SETUP button until 

the red indicator stays on 
(approximately 4 seconds) and then 
release the button.

2.  Press and release the device button 

(

TV, DVD, SAT, AUX) which is 

programmed to control the Master