Panasonic AJ- G User Manual

E-5

While the power supply of the camera 
recorder is turned off, connect the RCU 10-
pin connector of the camera recorder to the 
unit with the connection cable.
If settings are made from the camera menu, 
set the frequency to the frame frequency of 
the camera recorder and connect an NTSC 
or PAL monitor.

After turning on the camera recorder power, 
turn the unit power on.

z The frame frequency of the camera recorder 

must be switched before connecting the unit to 
the camera recorder.
At VIDEO output, NTSC signals are output for 
60 Hz operation, while PAL signals are output 
for 50 Hz operation.

z The settings for FUNC on the menu determine 

whether the camera recorder’s settings, which 
are adjusted when the unit is connected, are 
returned to the settings before connecting the 
unit or to the state after adjustment, when the 
unit is disconnected from the camera recorder.

z Do not forcefully pull the connected cable. 

When the camera recorder is used while it is 
being moved, the cable must be fixed to the 
tripod or the handle of the camera recorder so 
that no force is applied directly to the 
connector.

To determine whether the camera recorder supports the use of the unit, consult our sales dealers or the 
operation manual of the camera recorder.

AJ-RC10G.book  5 ページ  ２００６年７月２６日　水曜日　午前９時２５分