Panasonic AW-CB400L User Manual
18 (E)
ENGLISH
AW-CB400
100mm
AW-RP400
AW-CB400
1
Remove the rubber caps on the side panels.
2
Use the accessory mounting screws (M4
!
8 mm) to attach the rack-mounting adaptors. Remove the rubber caps.
1
Remove the rubber caps on the side panels of the AW-CB400.
2
Attach the accessory join-up screws (stepped screws) to the two places on the side of the ROP which is to be joined to
the AW-RP400.
the AW-RP400.
3
Adhere the joining stickers onto the side panels of the AW-RP400 concentrically with the join-up screws.
4
Align the
holes of the AW-CB400 with the join-up screws, shift in the direction shown by the arrow, and fit the two
units together to make a single integrated unit.
5
Attach the join-up fixture to bottom panels of the AW-RP400 and AW-CB400.
6
Attach the rack-mounting adaptors using the mounting screws (M4
!
8 mm) provided.
Rack-mounting adaptors
Join-up screws (stepped screws)
❈
When the AW-RP400 is to be joined on the left of the AW-CB400.
Accessory mounting
screws (M4
screws (M4
!
8 mm)
4 pcs
Mounting screws (accessory)
M4
M4
!
8 mm ..... 4 pcs
Join-up fixture
Remove the rubber caps.
Rubber cap
Join-up screws (stepped screws)
How to mount the ROP in a rack
Joining the ROP to the AW-RP400 and mounting the joined-up units in a rack
Joining sticker
Joining sticker
<NOTE>
≥
The AW-CB400 is 100 mm wide. If it is to be installed in a full-size rack (which accommodates units totaling
420 mm in width), provide panels or other parts to supplement the AW-CB400’s width so that it will fill the
rack width-wise.
420 mm in width), provide panels or other parts to supplement the AW-CB400’s width so that it will fill the
rack width-wise.
≥
If the AW-CB400 is joined to the AW-RP400, the resulting width will be equivalent to that of the full width of
the rack (which accommodates units totaling 420 mm in width).
the rack (which accommodates units totaling 420 mm in width).