Rotel RR-1060 User Manual

Operating the RR-1060

This section of the manual explains the basic

operation of the RR-1060 and most of its stan-

dard features.

NOTE

: The AUD DEVICE/INPUT button of the

RR-1060 is pre-programmed with control codes

for Rotel A/V receivers or surround sound proces-

sors. The V1 button is pre-programmed to operate

Rotel DVD players. The CD button is pre-pro-

grammed to operate Rotel CD players.The other

DEVICE/INPUT buttons (TUN, TAPE and V2 – V5)

are unprogrammed. You must program or learn

commands for these DEVICE/INPUT buttons.

Sending IR Commands

Instead of putting down one remote and pick-

ing up another, you simply press a button on the

RR-1060 to convert it from the remote control for

your CD player to the remote control for your TV

set. Here’s how:
1. Press a DEVICE/INPUT button (for under one

second) to activate the command set for the

desired component. For example, press the

AUD button to control a Rotel surround pro-

cessor. The label for your selection appears

in the display. The selected command set re-

mains active until you press a different DE-

VICE/INPUT button.

2. Press a COMMAND button to send an IR com-

mand to the component you have selected.

For example, press the POWER ON button to

turn on a Rotel surround processor. The label

for the COMMAND button appears in the dis-

play. If the label “NO DATA” appears in the

display, the button has no learned command

for that DEVICE.

NOTE

: The default labels that appear in the display

match the button labels. You can customize the

labels for every DEVICE/INPUT and COMMAND

button.
Remember that the COMMAND buttons duplicate

controls on many different types of audio/video

components. Their function depends on the type

of component selected. Make sure that you have

pressed the correct DEVICE/INPUT button and

use the button labels as guides.