AG Neovo ATP/AST Series User Manual

 

 

7 

Rev. 10©1999 - 2006 DMC Co., Ltd. 

§ Temperature Condition Test 

Following test are performed in the condition with no dew condensation: 

Cold Test: 

Tested after leaving the parts in -30°C

±3°C for 240 hours and in the room temperature 

for 2 hours. 

Heat Test: 

Tested after leaving the parts in 80°C

±3°C for 240 hours and in the room temperature for 

2 hours. 

Humidity Test:  Tested after leaving the parts in the temperature 60°C

±3°C, humidity 90 to 95% for 240 

hours and in the room temperature for 2 hours. 

Cycle Test: 

Tested after 5 cycles of leaving the parts in the temperature -30°C

±3°C for 1 hour and in 

the room temperature for 0.5 hours, then leaving the parts in the temperature 70°C

±3°C 

for 1 hour and in the room temperature for 0.5 hours. 

Judgement: 

Must satisfy the following: 
Activation Force: 

Within 

±50% of the specification. 

Linearity: 

Must satisfy the specification. 

Terminal Resistance: 

Must satisfy the specification. 

Insulation Resistance: 

Must satisfy the specification. 

Appearance: 

Must satisfy the specification. 

 

 

 

KCA-K4R 

4 pin Double-sided 

1.25mm