Roland GR-33 User Manual
27
Chapter 3 Controlling Functions and Effects with the Base Module Pedals
Chap.
3
Turning Arpeggiator and Harmonist On/Off
The GR-33 comes with Multi-Effects, Arpeggiator, and
Harmonist functions that can be turned on and off using the
pedals.
Harmonist functions that can be turned on and off using the
pedals.
* The MULTI-FX Bypass, Arpeggiator and Harmonist can be
turned on or off individually for each Patch. To learn about
these settings, refer to p. 46.
these settings, refer to p. 46.
* You may hear a noise when MULTI-FX BYPASS is switched
on/off, but this does not indicate a malfunction.
■
Using the pedals for on/off switching
System mode “S1/S2 ACTION” to “Patch Select” and
return to Play mode.)
return to Play mode.)
2. Press Pedal 4 (CTRL).
The specified function—MULTI-FX BYPASS,
Arpeggiator, or Harmonist—will be switched on or off.
This selection can be made by the Patch Edit mode
“COMMON” setting “CTRL PEDAL” (p. 46).
Arpeggiator, or Harmonist—will be switched on or off.
This selection can be made by the Patch Edit mode
“COMMON” setting “CTRL PEDAL” (p. 46).
<Some Notes About the Display>
MULTI FX BYPASS On/Off
“bYP” or “oFF” appears for approximateryone second in
the three-digit display.
the three-digit display.
Arpeggiator On/Off
“Arp” or “oFF” appears for approximateryone second in
the three-digit display.
the three-digit display.
The display responds as shown below when the
Arpeggiator is being turned on.
Arpeggiator is being turned on.
fig.3-10
Harmonist On/Off
“HAr” or “oFF” appears for approximatery one second
in the three-digit display.
in the three-digit display.
The display responds as shown below when the
Harmonist is being turned on.
Harmonist is being turned on.
fig.3-02
Either the Arpeggiator or Harmonist—but not both—can
be selected for a patch. Even when they are turned off,
either the Arpeggiator or Harmonist is still selected.
When the Arpeggiator (Harmonist) is turned on, the
display of the Play mode shows “ARP” or “HAR” to
indicate which one currently selected.. If the harmonist is
selected, the currently selected key will also be
displayed.
be selected for a patch. Even when they are turned off,
either the Arpeggiator or Harmonist is still selected.
When the Arpeggiator (Harmonist) is turned on, the
display of the Play mode shows “ARP” or “HAR” to
indicate which one currently selected.. If the harmonist is
selected, the currently selected key will also be
displayed.
* When you want to switch from Arpeggiator in a certain patch
to Harmonist (or vice versa), press [EFFECTS] to change the
“HAR/ARP SELECT” setting.
“HAR/ARP SELECT” setting.
For more detailed information and instructions for this
procedure, refer to p. 78 and 82.
procedure, refer to p. 78 and 82.
About MULTI-FX
These are effects for the synthesizer sound.
About Arpeggiator
This is a function that automatically creates arpeggios —
chords whose notes are played in sequence, rather than
simultaneously — when a chord is played.
chords whose notes are played in sequence, rather than
simultaneously — when a chord is played.
About Harmonist
This creates harmonies in designated keys using either
guitar and synthesizer sounds, or two synthesizer
sounds together.
guitar and synthesizer sounds, or two synthesizer
sounds together.
Key