JVC CA-MXJ75R User Manual
– 21 –
English
4
ONLY FOR “PRO LOGIC”
Press DELAY TIME repeatedly to
select the proper delay time of the
rear speaker output.
Press DELAY TIME repeatedly to
select the proper delay time of the
rear speaker output.
• Each time you press the button, the delay
time changes as follows.
DELAY1:
Select this when the distance from you
to your rear speakers is greater than that
to the front speakers.
to your rear speakers is greater than that
to the front speakers.
DELAY2:
Select this when the distance from you
to your rear speakers is almost equal to
that to the front speakers.
to your rear speakers is almost equal to
that to the front speakers.
DELAY3:
Select this when the distance from you
to your rear speakers is less than that to
the front speakers.
to your rear speakers is less than that to
the front speakers.
DELAY4:
Select this when the distance from you
to your rear speakers is much less than
that to the front speakers.
to your rear speakers is much less than
that to the front speakers.
5
Press TEST TONE to check the
speaker output balance.
speaker output balance.
A test tone comes out of the speakers in the
following order:
following order:
* “CENTER” does not appear when selecting “PHANTOM” or
“OFF” for the center mode, and no test tone comes out of the
center speakers.
center speakers.
6
Press VOLUME + / – to adjust
the test tone volume to a proper
level.
the test tone volume to a proper
level.
7
If necessary, adjust the speaker output
balance so that the output level from center
and rear speakers is almost equal to that
from the front speakers:
balance so that the output level from center
and rear speakers is almost equal to that
from the front speakers:
To adjust the center speaker output level
(from –10 to +10), press CENTER LEVEL
– / +.
• You cannot adjust the center speaker
(from –10 to +10), press CENTER LEVEL
– / +.
• You cannot adjust the center speaker
output level when you select
“PHANTOM” or “OFF” for the center mode.
“PHANTOM” or “OFF” for the center mode.
To adjust the rear speaker output level
(from –10 to +10), press REAR LEVEL – / +.
• You cannot adjust the right and left speaker
(from –10 to +10), press REAR LEVEL – / +.
• You cannot adjust the right and left speaker
output levels separately.
• You cannot adjust the rear speaker output
level when using Dolby 3 Stereo.
*
DELAY TIME
LEFT
(Left front speaker)
SURROUND
(Rear speakers)
CENTER
(Center speaker)
RIGHT
(Right front speaker)
+
–
CENTER
LEVEL
+
–
REAR
LEVEL
+
–
TEST TONE
TEST TONE
8
Press TEST TONE again to stop the
test tone.
test tone.
9
Release SHIFT.
Enjoying Playback with Dolby Surround
You can use the settings you have already stored in memory.
On the unit:
1
Press PRO LOGIC / 3 STEREO to
select the Dolby Surround mode you
want.
select the Dolby Surround mode you
want.
The PRO LOGIC or 3 STEREO indicator lights
up on the display
• Each time you press the button, the Dolby Surround
up on the display
• Each time you press the button, the Dolby Surround
modes changes as follows:
• When Dolby Surround is activated, the sound mode is
canceled temporarily.
2
Select and play a sound source encoded with
Dolby Surround (with the
Dolby Surround (with the
DOLBY SURROUND
mark).
To cancel the Dolby Surround mode, press PRO LOGIC / 3
STEREO repeatedly until neither PRO LOGIC nor 3
STEREO indicator remains lit on the display.
STEREO repeatedly until neither PRO LOGIC nor 3
STEREO indicator remains lit on the display.
On the remote control:
1
Press and hold SHIFT until the
following procedure is finished.
following procedure is finished.
2
Press PRO LOGIC or 3
STEREO whichever you
want to use.
STEREO whichever you
want to use.
The PRO LOGIC or 3 STEREO
indicator lights up on the display.
indicator lights up on the display.
• When Dolby Surround is activated, the sound mode is
canceled temporarily.
3
Select and play a sound source encoded with
Dolby Surround (with the
Dolby Surround (with the
DOLBY SURROUND
mark).
To cancel the Dolby Surround mode, press PRO LOGIC or
3 STEREO (the same button you have pressed to activate
Dolby Surround in step 1 above) so that neither PRO LOGIC
nor 3 STEREO indicator remains lit on the display.
3 STEREO (the same button you have pressed to activate
Dolby Surround in step 1 above) so that neither PRO LOGIC
nor 3 STEREO indicator remains lit on the display.
PRO LOGIC
3 STEREO
Canceled
PRO LOGIC
/ 3 STEREO
/ 3 STEREO
SHIFT
PRO LOGIC
3 STEREO
DELAY1
DELAY2
DELAY4
DELAY3
EN20-24.MXJ75R[EV]/3
99.4.19, 9:52 PM
21