Lg Electronics RCRPS06GR User Manual

17

The DVR•AUX1 key defaults to control a DVR, and 
the VCR•AUX2 key defaults to control a VCR. If you 
want the DVR•AUX1 or VCR•AUX2 key to control a 
different device (an additional TV, DVD, satellite or 
cable box, for example), you must reassign it.

1.   Press and hold the DVR•AUX1 or VCR•AUX2 

key. The POWER key turns on.

2.   While holding down the DVR•AUX1 or 

VCR•AUX2 key, press and release the number 
key on the keypad for the device you wish to 
control (see the chart below). The POWER key 
turns off.

Additional TV

press 1

VCR or DVR

press 2

Additional DVD

press 3

Additional audio device

press 4

Additional satellite receiver, cable box, 
or DTV converter

press 5

3.   Release the DVR•AUX1 or VCR•AUX2 key. The 

POWER key blinks four times and then turns 
off. The DVR•AUX1 or VCR•AUX2 key is now 
set to control the device type you selected.

4.   Follow the directions in the auto, brand, direct 

entry, or manual code search to program the 
DVR•AUX1 or VCR•AUX2 key.

Volume Punch-Through allows the VOL and MUTE 
keys, when pressed in SAT•CBL•STREAM, DVD, 
DVR•AUX1, or VCR•AUX2 modes, to “punch 
through” to either TV or AUDIO, whichever was 
accessed last. Volume Punch-Through occurs 
automatically and allows you to control the volume 
without exiting the current mode. (If the DVR•AUX1 
or VCR•AUX2 key has been programmed with a TV 
or AUDIO code, volume can punch through to this 
device as well.)

1.   Press and hold the P key for 3 seconds. The 

POWER key comes on.

2.   Press VOL+ to enable Master Power again.

3.   Press the P key to confi rm. The Master Power 

function is enabled again.