Konica Minolta VI-910 User Manual

118

File
Menu

Performing One Scan with the VIVID 300

This command is used to cause the VIVID 300 (VI-300) to scan the object one scan at a time using the remote
control function of this software.

Never stare into the laser emitting window.
Do not place a lens, mirror or optical element in the passage of the laser beam. Doing so may converge the 
laser beam, resulting in damage to your eyes, burns or fire. To prevent the above accidents, make sure that a 
wall or similar which can block the laser beam is located behind the object.

The [File-Import-Digitizer-One Scan] dialog 
box will appear.

Before performing the procedure below, make sure that 
the digitizer you are going to use is selected by the File 
– Select Digitizer command.

Ref.  For details of the File – Select Digitizer command, 

•  To set the scan reference position (Distance) and 

laser intensity (Laser Intensity), perform the fol-
lowing procedure.

q

 Check the [Option] checkbox.

w

 Check the [Manual] checkbox.

e

 Move the Distance bar or Laser Intensity bar to 

the desired position.

•  If you are not going to scan both color and range 

images at the same time, uncheck the [Auto

 read] 

checkbox.

•  The color monitor image currently captured by 

the VIVID 300 will appear in the “Color” area of 
the dialog box. (No color image will appear if the 
[Auto read] checkbox is unchecked even if the 
[Option] checkbox is checked.)

Check the [Option] checkbox, and make nec-
essary parameters.