Konica Minolta VI-910 User Manual
160
Chapter
2
Select
Menu
Menu
9i
910
900
700
300
300
Select – Bezier
Selecting Points within Specified Bezier Curve
This command is used to select the points present within a Bezier curve drawn using the mouse.
Note
• No any other commands can be executed until this command is canceled. To execute another command, press the [ESC]
key to cancel the Select – Bezier mode.
• All the steps must be carried out within the same window. The size of the window (full or 1/4) must be set in advance.
M
emo
Selected points will be displayed in red, and unselected points will be displayed in blue.
Note
When Windows Vista or Windows 7 is used, it may occur that the object cannot be drawn. In this case, please set the window
design other than Windows Aero. To change the window design, right-click on the desktop and select Personalize – Window
Color and Appearance.
design other than Windows Aero. To change the window design, right-click on the desktop and select Personalize – Window
Color and Appearance.
Left
: Sets control points/Edits control points if the curve is closed.
Middle ([Shift] + Left) : Confirms the curve if it has been closed/Unselects the points and exits the menu.
Right
Right
: Closes the curve/Confirms the curve if it has been closed/Selects the points and exits the menu.
Operating Procedure
1
From the element list, select the de-
sired element.
2
Click [Bezier] on the [Select] menu.
The selected element will be ready to be dis-
played in all windows. It will be displayed if it
is not displayed in the active window or the
windows for which all the elements are set to
be displayed.
played in all windows. It will be displayed if it
is not displayed in the active window or the
windows for which all the elements are set to
be displayed.
3
Enclose the desired area with a Bezier
curve.
Clicking the left mouse button will create a
control point. Dragging it will create a tangent
line for the created control point. Locate the
mouse to the next desired point, and click the
left button to create another control point.
Repeat the above steps until the desired area
is enclosed with a Bezier curve.
control point. Dragging it will create a tangent
line for the created control point. Locate the
mouse to the next desired point, and click the
left button to create another control point.
Repeat the above steps until the desired area
is enclosed with a Bezier curve.
M
emo
• The Bezier curve will be shown in white and the con-
trol points in yellow.
• If the Select – Select Front command is switched on
(i.e. the command name is checked in themenu), the
Select – Point command will operate only on points
comprising polygons that are at the front and that are
visible, and the mouse cursor will change to “
Select – Point command will operate only on points
comprising polygons that are at the front and that are
visible, and the mouse cursor will change to “
+
F
”. If
the Select – Select Front command is off (unchecked),
the Select – Point command will operate on all points,
and the mouse cursor will change to “
the Select – Point command will operate on all points,
and the mouse cursor will change to “
+
”.
4
Click the right mouse button.
The Bezier curve will be closed and edit mode
is activated.
is activated.
Control point
Tangent line
Drag