Konica Minolta VI-910 User Manual

58

File
Menu

Performing Step Scan with the VIVID 910

This command is used to cause the VIVID 910 (VI-910) to make multiple shots of the object by controlling 
the rotary stage remotely from this software. Registration of multiple scan data can be performed using the Calibra-
tion Chart for extract center of rotation.

Never stare into the laser emitting window.
Do not place a lens, mirror or optical element in the passage of the laser beam. Doing so may converge the 
laser beam, resulting in damage to your eyes, burns or fire. To prevent the above accidents, make sure that a 
wall or similar which can block the laser beam is located behind the object.

n

The [File-Import-Digitizer-Step Scan] dialog 
box will appear.

•  The calibration chart is an accessory of the rotating 

stage set.

•  Before performing the procedure below, make sure that 

the digitizer you are going to use is selected by the File 
– Select Digitizer command.

Ref.  For details, refer to parameters (P.144) for [File-

•  The monochrome monitor image captured by the 

VIVID 910 will appear in the Work window area 
of the dialog box.

•  If the Model folder contains the Chart data that is 

considered to be appropriate, it will be imported 
automatically.