Universal Remote Control URC-100 User Manual

Press and hold both the POWER ON and the STOP 
button for ten seconds. 

After the display flashes ERASE ten times you can release 
the buttons. The display will flash CLEAR and the Unifier 
will return to normal operating mode.

Press and hold both the DEVICE button and the 
MUTE button (to erase Device buttons, use AUDIO
and MUTE). Release after SET appears on the display.

Note: You have 30 seconds for each step, otherwise the 
Unifier will time out automatically. 

Press the macro button you want to erase. The 
display will flash “CLEAR” then “M ###”.

Press the LIGHT button to save.