Konica Minolta VIVID 300 User Manual

193

Build
Menu

If you selected [Point/Point/Point]:

•  Once you have extracted the three points, the 

program displays the input design values and the 
standard deviations of the extracted points.

   Click [Yes] to continue.
   Click [No] if you wish to re-enter the design 

values.

If you selected [Face/Point/Point], [Face/Point/
Line], [Face/Line/Line]:

•  You can use the [Reverse] button to invert the 

normal vector of the face that you extracted in 
Step 4 

above. If you select [Reverse], the program will 

invert the face, recalculate the coordinate system, and 
then redraw the display accordingly.

The [Question] dialog box will appear.

Coordinate conversion will be performed.

Parameters for [Build-Move-To X-Y-Z] Dialog Box

Point/Point/Point

You set up a new coordinate system by extracting three points, one at a time, from among the 
selected points. The program generates the origin and axes of the new coordinate system based on 
the coordinate positions and design values of the three extracted points.

Face/Point/Point

Extracts a face and two points from the selected points sequentially to set a new coordinate sys-
tem. Two axes and origin on the face are calculated based on the attribute of face and the coordi-
nate/design values of the extracted points to generate a new coordinate system.

Face/Point/Line

Extracts a face, point, and line (in that order) from the selected points set. Calculates the origin 
or the new coordinate system based on the face attribute and the coordinate/design values of the 
extracted points; determines a single axis from the extracted line attribute; and generates the new 
coordinate system accordingly.

Face/Line/Line

Extracts a face and two lines from the selected points sequentially to set a new coordinate system.
The origin and two axes are calculated based on the attribute of face and two lines to generate a 
new coordinate system.

Build – Move – To X-Y-Z