Universal Remote Control URC-WR7 User Manual
Page 32
Erasing MacroPower & Other
Macro Commands
Macro Commands
STEP 1:
To erase MacroPower commands
on the POWER [ON] or [SYSTEM OFF] but-
ton, press and hold either the POWER [ON]
or [SYSTEM OFF] button and the [MUTE]
button simultaneously for two seconds until
the current status component LED turns on.
ton, press and hold either the POWER [ON]
or [SYSTEM OFF] button and the [MUTE]
button simultaneously for two seconds until
the current status component LED turns on.
IMPORTANT:
If you don’t proceed to the
next step within 30 seconds, the LED will
turn off and exit set-up mode and you will
need to start over.
turn off and exit set-up mode and you will
need to start over.
STEP 2:
Press the CHANNEL UP [CH
]
button to erase and exit Erase mode. The
component LED light will blink three times to
confirm the erasure.
component LED light will blink three times to
confirm the erasure.
NOTE:
To erase other Macros, simply press
the appropriate button in Step 1 in combina-
tion with the [MUTE] button.
tion with the [MUTE] button.
POWER
ON
SYSTEM
OFF
CHANNEL
UP
MUTE