Konica Minolta VI-900 User Manual
186
Chapter
2
Build
Menu
Menu
9i
910
900
700
300
300
Build – Registration – Fine – Points
Performing Fine Registration of Selected Points
This command is used to perform fine registration of the points present in the selected elements.
Operating Procedure
1
From the element list, select the desired
elements.
M
emo
• It is possible to select two or more elements by clicking
them while holding down the [Shift] or [Ctrl] key.
• Among the selected elements, the element located first
in the element list will be used as the basis element for
registration.
registration.
2
From each selected element, select the
points to be subjected to fine registra-
tion.
tion.
3
From the [Build] menu, select [Registra-
tion], [Fine] and then click [Points].
The [Build-Registration-Fine-Points] dialog box
will appear.
will appear.
• The selected element will be ready to be dis-
played in all windows. It will be displayed if
it is not displayed in the active window or the
windows for which all the elements are set to be
displayed.
it is not displayed in the active window or the
windows for which all the elements are set to be
displayed.
4
Set the base element, and then click the
[OK] button.
The program executes fine registration for the
selected points in the selected elements. It
then displays a dialog asking whether results
are satisfactory.
selected points in the selected elements. It
then displays a dialog asking whether results
are satisfactory.
5
Click the [OK] button.
The menu will be exited.
• To continue fine registration processing, click the
[Repeat] button.
M
emo
The [Error Average] and [Sigma] values are indicators of
the correctness of the registration (the alignment).
In general, the closer to zero they are, the more accurate
alignment is.
the correctness of the registration (the alignment).
In general, the closer to zero they are, the more accurate
alignment is.