Konica Minolta VI-900 User Manual

Chapter

File
Menu

900

910

File – Import – Digitizer – PC Card (When VIVID 900/910 is Selected)

Importing Data from the Memory Card of VIVID 910 or VIVID 900

This command is used to remote-control the data stored in the memory card of the VIVID 910 (VI-910) or
VIVID 900 (VI-900).

Note

This command does not operate on step-shot scan data

in the memory card.

Parameters for [File-Import-Digitizer-PC Card] Dialog Box

File name

Displays file names stored in the memory card.

Date

Displays the dates on which the files are stored in the memory card.

Size

Displays the size of each file (in bytes).

Total **files

Displays the total number of camera data files stored in the memory card.

** MB/ ** MB

Displays the unoccupied capacity and total capacity of the memory card.

emo

• Before performing the procedure below, make sure that

the digitizer you are going to use is selected by the File
– Select Digitizer command.

• Note that if multiple VIVID units are connected,

the software can only access the memory card in the
VIVID unit with the highest SCSI ID setting.

Ref. For details of the File – Select Digitizer command,

refer to page 144.

Operating Procedure

From the [File] menu, select [Import],

[Digitizer] and then [PC Card].

The [File-Import-Digitizer-PC Card] dialog box
will appear.

emo

• Only the raw image data (.cdm) scanned by the VIVID

910(VI-910) or VIVID 900(VI-900) will be displayed.

• Upper-case file names specified using the camera will

be converted to lower-case file names when the files are
imported to this software.

Select the file you want to import.

• To perform dark correction for the color data,

check the [Dark Correction] checkbox.

• To display the preview image, check the [Pre-

view] checkbox (so that a check mark appears in
the check box). A color image of the selected file
will be displayed.

emo

A clock icon will be displayed during loading.