Sony STR-DA9000ES User Manual

masterpage:Right

filename[\\Nas-data-server\SONY Current jobs\SONY STR-
DA9000ES\DTP\4249349131\424934913STR-DA9000ESUC2\GB06ADV_STR-DA9000ES-
U.fm]

 model name1[STR-DA9000ES]

 [4-249-349-13(1)]

This receiver features the custom install modes 
described below. Depending on how you intend 
to use these features, use of these modes may 
require additional equipment (available 
separately) or modification of your listening 
environment. Please consult the retailer where 
you purchased this receiver for more 
information.

For details, see “CIS menu parameters” 
below.

Repeat steps 2 and 3 to adjust the other 
items.

Initial settings are underlined.

x

x

Lets you select the source signals (analog audio and 
video signals for 2nd zone; only analog audio signals 
for 3rd zone) you want to output in the 2nd zone or 3rd 
zone (except PHONO and i.LINK). When you select 
“SOURCE”, the signals of the current input is output.

• Only signals from components connected to the 

analog input jacks are output through the 2ND ZONE 
or 3RD ZONE jacks. No signal is output from 
components connected to only the digital input jacks.

• When “SOURCE” is selected, the signals input to the 

MULTI CHANNEL INPUT jacks are not output 
from the 2ND ZONE or 3RD ZONE jacks even when 
MULTI CH IN function is used. The 2 channel 
analog audio signals of the current input is output.

x

• ON

The receiver can receive commands from the 
RS232C port even when the power is off (standby 
mode).

• OFF

The receiver does not receive commands from the 
RS232C port when the power is off (standby mode).

x

x

x

x

x

Lets you turn on or off the external equipment by 
outputting 12V triggers (5 outputs) when the receiver 
is turned on or off. For example, you can automatically 
unroll your video screen when you turn on the receiver.

• OFF

Lets you turn off output of 12V triggers even when 
the main receiver is turned on.

• CTRL

Lets you turn on or off the output of 12V triggers 
manually by the CIS command of the IR remote or 
RS232C control.

• ZONE (for “12V TRIG. MAIN”, “12V TRIG. 2ND” 

and “12V TRIG. 3RD” only)

Lets you turn on output of 12V triggers when the 
main receiver or the receiver in each zone is turned 
on.

• INPUT (for “12V TRIG. MAIN” only)

Lets you turn on output of 12V triggers when the 
main receiver is turned on, depending on the setting 
of each input. See “To set the 12V trigger setting for 
each input”.

• MAIN (except for “12V TRIG. MAIN”)

Lets you link 2nd or 3rd zone trigger operation to the 
main receiver.

The initial setting is “OFF” for all inputs. To set 
this setting, you can use only the controls on the 
front panel.

Select “INPUT” in “12V TRIG. MAIN”.

Press MEMORY/ENTER.

Rotate MENU to select the input.

Rotate –/+ to select “ON” to activate 12V 
trigger or select “OFF” to disactivate.

Press MEMORY/ENTER.