Marantz RC3200 User Manual
User Guide
16
The Learn Sequence
1 From the Home page, select the device, e.g. TV, with the but-
tons you want to teach new commands to.
The device screen appears.
2 Press and hold the Mode button for 3 seconds.
The Mode Menu appears.
3 Tap Learn on the Mode Menu.
RC3200 is now in Learn Mode. ‘Learn’ and the label of the
selected device appear at the top of the touch screen.
selected device appear at the top of the touch screen.
4 Use, if necessary, the Page Up or Page Down button to go to
the next button you want to learn.
5 Press the soft or hard button you want to learn on the RC3200.
The Learn label changes to Learning, which means RC3200 is
ready to receive commands froman existing remote control. The
RC3200 will wait for 3 seconds to receive an IR code from
another remote control.
ready to receive commands froman existing remote control. The
RC3200 will wait for 3 seconds to receive an IR code from
another remote control.
Note
When a hard button is pressed to learn, there is no on screen
feedback to indicate which button is pressed.
6 Press and hold the button on the existing remote control you
want to learn to the RC3200.
When the RC3200 receives an IR code:
• You hear a confirmation beep;
• The label changes from Learning to OK.
• The label changes from Learning to OK.
The Learn sequence has been successful.
When the RC3200 does not receive an IR code in 3 seconds:
• You will hear an error beep;
• The label changes from Learning to Failed.
• The label changes from Learning to Failed.
The Learn sequence has failed. RC3200 will return to Learn mode.
Return to step 5 of the Learn sequence to relearn the button.
Return to step 5 of the Learn sequence to relearn the button.
Setting Up Your RC3200