Universal Remote Control RF20 Owner's Manual

Activating Component Commands

LIGHT BUTTON 

Once you’ve programmed RF20 for your
Components, all you have to do to operate
a specific Component is first, press the
MAIN button. This will display Page 1 of
the MAIN menu on the LCD screen. Page
1 of the MAIN menu displays five
Components. Then, simply select the
Component you want to operate by 
pressing the corresponding Screen-
Labeled Component Display Button on the
right side of the LCD Screen. As an 
example, if you press the TV Display
Button, the display label at the top of the
screen will change from MAIN to TV, and
all the but- tons on RF20 will work your TV.
To operate another Component, simply
press the MAIN button again to return to
Page 1 of the MAIN menu and select the
next Component you want to operate.

If you don’t see the Component you want
to control on Page 1 of the MAIN menu,
just use the PAGE ( ) ( ) buttons on the
left side of the screen to bring up Page 2
of the MAIN menu which displays an
additional five Components.

Each Component is provided with five
pages of pre-labeled command display
buttons (or space for additional command
display buttons). Once again, simply use
the PAGE ( ) ( )  buttons to take you to
the next command page, or return you to
the previous command page.

The fully backlit keypad makes the RF20 easy to use in the dark or dim lighting 
conditions. Simply press the LIGHT button to backlight all the keypad buttons and
LCD screen.
To turn off the backlight, press the LIGHT button again, or just wait ten seconds (the
backlight automatically shuts itself off). Lights out!

Try it out!