Marantz RC1200 User Manual

22

• If, while programming, no buttons are

pressed for approximately 1 minute,
the remote controller will automatically
return to normal mode, and no macro
will be programmed in the memory.

When you are finished programming
macros, use a ballpoint pen or other
sharp point to press the 

button

x. LCD 

A will display 

, and the

display will return to normal.
• Macros cannot be programmed for the

z, 

x, 

 • 

3 ⁄1, 

/  ., 

⁄6 or 

⁄5 buttons.

Although function operations in the
Macro Mode can be programmed
more than once, only the first function
memorized in the ten function buttons
including LD, CD, TV--but not the AMP
button--will be sent from the remote
controller (the amplifier or receiver
function will change).  For this reason,
it is not possible to select multiple
amplifier functions in a macro button.

(If the AMP button is programmed, the
same operations as those in the other
function buttons will be performed.)

Therefore, when executing operations
in the Macro Mode, what happens is
that, starting with the second function
operation, only the function mode of
the remote controller is changed, and
no signals are sent.

Macros may be edited using following
procedure.

Use a ballpoint pen or other sharp point to
press the 

button  x until the

and 

indicators are

displayed blinking on the LCD.

Press the  

button  ,  to be

changed. Let’s use the example of the
laser disc player, by pressing the 

 button ,.

•

 is displayed blinking on LCD 

A.

• The number of steps in the completed

macro is highlighted on LCD 

C. In this

example there are 3 macro programs
in memory.