Universal Remote Control SL-7000 User Manual

Advanced Features

If you wish  to find a code number that has been stored in your remote control,
please 

use the following steps:

Step 1: On the remote control, press the DEVICE and MUTE buttons simultaneously.

Step 2: Press the INPUT button. The LCD will flash the three digit code number 

for five seconds before returning to its original sate.

Memory buttons M1, M2, M3 and M4 can be set up to store up to six(6) commands
with one button push. Any  functions, in any  Device mode (except Channel up and
Channel down),  can  be  stored  in  any one of the four memory buttons.  
This will enable you, for example, to turn on the TV and Satellite receiver and select
a preassinged satellite channel with only one button push.

Method of setting up:
Step 1: Press the Device button (TV, VCR, CATV, SAT, AUX, AUDIO) and MUTE 

button, simultaneously. 
Note:  SET will appear in the LCD.

Step 2: Press one of the memory buttons(M1-M4) that you would like to designate 

for multi-command or favorite channel operation. 
Note:  M       (1-4) will appear in the LCD. The memory button 
is now ready to be set up.

Step 3: Press up to six commands that you would like to store in the memory button.

Step 4: Press the   Channel(+) button to store your selection.

Please repeat the above steps for the remaining memory buttons.