Sony RM-VZ950T User Manual

The LCD  (Liquid Crystal Display)
displays the component in
operation or the current status of
the Commander as shown below.
It also has a backlight that lights
up when you turn or push the Jog
dial during component operations
(does not light up at SET modes).
When a remote control signal is
sent,  

 appears in the display.

* You can control up to 8 components,

each of which are preset at Setting
position numbers “S-1” to “S-8.”

At normal conditions, the LCD display
shows the last selected component
name. When the batteries are low of
charge, “BATT” appears in the display
after you press a control button.

The Jog dial can be used to
perform various operations at the
setup procedure, as well as
selecting the components to
operate.

1 Turn the Jog dial to select the

component you want to
operate.

2 Press the button for the desired

function.

1 Turn the Jog dial to select the

Setting position number (“S-1”
to “S-8”).

2 Press to enter.

The component name flashes in
the display.

You can also press b/B instead of
turning the Jog dial to the left/right
(except for when you select a character
at the NAME mode).
You can also press OK instead of
pressing the Jog dial.

Current Component

Remote control signal indicator

-1

S

¢

E S E T

P R

V

T

¢ 1

Remote control signal indicator

Component

Component
code number

Setting mode

Setting position number*

R

C

V

-1

S

E S E T

P R

V

T