Sony RM-VL710 Manual

SET

SET

VCR

VCR

While holding x pressed,
press the Component Select
button you want to erase.

When erasing of a “learned”
function has completed, all the
other Component Select button
lights turn off.

• With this operation, you can only

erase the “learned” functions of
all buttons for a specific
component.

• To erase a single “learned”

function of a Component Select
buttons, see page 20.

Press SET to finish setting.

To cancel erasing, press SET.

during data
erasing

data erasing
complete

If you change the settings of the
air-conditioner for the season, you
have to program the remote
control signals of the new settings
on the Commander.

If the Commander can only
operate “ON” with one button
and “OFF” with another, while
your air-conditioner’s remote
control can operate “ON/OFF”
with a single button, program the
signal on two buttons of the
Commander as follows.

1 Clear the “learned” power-on/

off signal on the programmed
button of the Commander.

2 Reprogram only the power-on

signal of the air-conditioner on
the button of the Commander
by following the steps of
“Programming signals of
another remote control-
Learning Function” (page 14).

3 Program the power-off signal of

the air-conditioner on another
button of the Commander.

The two buttons of the
Commander have been
programmed with the power-on
signal and the power-off signal of
the air-conditioner respectively, so
that you can operate the air-
conditioner with the Commander.