Toshiba 3530C User Manual

132    Printing from an Application

‰

The booklet mode outer margin can be selected using the following options.

Example: The command to select the outer margin value for booklet printing mode is 
“lp -o outermargin=value filename”.

‰

The collate option can be selected using the following options.

If this option is not specified, the default value of “collate=on” will be used.
Example: The command to select collate off is “lp -o collate=off filename”.

‰

The following orientation options are available.

If this option is not specified the command will not be sent so the printer’s default value will be used.
Example: The command to specify landscape orientation is “lp -o landscape filename”.

‰

If the pitch is specified the net_estcolor program will always select the Courier font; otherwise the default font is used. The 
following options are used to select the font pitch.

In all the cases shown above the Courier font will also be selected. When the pitch is changed the font size will 
automatically be scaled to the appropriate size.
If this option is not specified, the default pitch and font will be used.
Example: The command to specify 8 characters per inch is “lp -o pitch=8 filename”.

outermargin
=value

Select the outer margin value for the booklet printing 
mode.
This value specifies in pixels the Outer Margin or the 
“Creep” per page, which should take place while 
printing a booklet. The valid range for value is 0 - 600. 
Default is 0.

collate=off

OFF

Cancel the collate printing mode.

collate=on

ON

Set the collate printing mode.

portrait

Print the document in portrait orientation.

landscape

Print the document in landscape orientation.

c

pitch=16.67

Set the character pitch to 16.67 characters per inch.

10

pitch=10

Set the character pitch to 10 characters per inch.

12

pitch=12

Set the character pitch to 12 characters per inch.

pitch=value

Set the character pitch to value characters per inch.