Sunwave Tech. SRC-2200 User Manual

(1) Access the Setup menu and select 

Learning to begin the learning 

procedures.  

(2) Press the scroll key 

  to select the 

device you want to learn, and then 

enter the device to learn each single 

key. Learning process for both soft and 

hard keys will be done and shown on 

the screen.   

Note: A key with “

” mark means it’s a 

hard key. 

 

(3) Aim the transceiver of your original 

remote control at the Learning Eye, 

keep a distance of between 2 and 4 

inches. (approx. 5-10 cm) 

(4) Follow the wizard, which guides you to 

learn the key one by one, or directly 

select keys you want to assign codes 

to. 

(5) Press a corresponding key on original 

remote until “

√” appears on the right 

hand side of the learning key and two 

beeps are heard; then release the key.

 

 

 

14