Sony RM-AV3100 User Manual
59
5
Press the “ENTER” key.
During transferring the data,
“
“
c c c c” flashes.
When the data has been successfully
transferred, “END” appears on the
right Label key.
transferred, “END” appears on the
right Label key.
Note
If “NG” appears while sending the data, go
back to Step 6 and continue the operation
or press COMMANDER OFF to stop the
operation.
back to Step 6 and continue the operation
or press COMMANDER OFF to stop the
operation.
6
Press COMMANDER OFF.
COMMANDER
OFF
If you keep COMMANDER OFF
pressed for more than 2 seconds
pressed for more than 2 seconds
The Commander turns off.
If you keep COMMANDER OFF
pressed for less than 2 seconds
pressed for less than 2 seconds
The Commander returns to the previous
setting mode.
setting mode.
Notes
• The data of the System Control function
programmed for a Component Select button
cannot be transferred.
cannot be transferred.
• Be sure that the receiving Commander is
ready to receive data.
Receiving the data
This Commander can receive the data of
another Sony RM-AV3100.
another Sony RM-AV3100.
To receive all the data from
another remote commander
another remote commander
1
Follow Steps 1 to 5 on page 54.
2
Press the
x key.
X : Transfer data
x : Receive data
x : Receive data
3
Press the ALL key.
ALL
ALL:
All data of the Commander
COMPO: Data of a Component
Select button or a Label key
Continued