X10 Wireless Technology MK19A User Manual

41

40

If you have installed the Transceiver

Module (sold separately) you can control

it and other X-10 modules as follows:

1. Press and release

the X-10 button.

2. Use the number

buttons to enter the

Unit Code number

of the chosen

module. (You do

not need to enter

‘0’ first for a single

digit number.)

3. Press the appro-

priate button for the

function you require

(see below).

X-10 FUNCTIONS:

On:

CHANNEL +

Off:

CHANNEL –

Bright:

VOLUME +

Dim:

VOLUME –

All Lights On:

POWER

All Modules Off:

MUTE

Note: You cannot dim or brighten an

Appliance Module. If the module was off

and you press Bright or Dim (VOLUME+

or VOLUME-) this will simply turn the

module on.

C

ONTROLLING

 X-10

M

ODULES

L

AMP

 M

ODULE

The Lamp Module (sold separately) may

be used to control any incandescent

lamp rated up to 300W. It is not suitable

for other types of lamps such as

fluorescent or energy saving lamps, or

lamps which include a dimmer control.
Caution: Do not connect an appliance

such as a coffee pot or heater to the

Lamp Module. It may damage the

Module and the appliance and could

cause a fire hazard.

1. Set the House Code

to ‘A’ and the Unit

Code to ‘2.’

2. Plug a lamp into

the Lamp Module.

3. Plug the Lamp

Module into a

convenient AC

outlet.