Atlona AT-LINE-EX User Manual
2
Operation Controls and Function
4.1 Front Panel
4.2 Rear Panel
Connect your devices to AT-LINE-EX Media Center
1. Connect the HDMI cables from your displays (monitor or projector) to the outputs
1. Connect the HDMI cables from your displays (monitor or projector) to the outputs
of the AT-LINE-EX.
2. Connect the input sources to the input ports of AT-LINE-EX. (You can connect 2
2. Connect the input sources to the input ports of AT-LINE-EX. (You can connect 2
HDMI™ sources to the HDMI inputs of AT-LINE-EX, 2 VGA sources to the VGA
inputs of AT-LINE-EX, and 2 analog sources to the analog inputs of AT-LINE-EX.)
3. Plug the power adaptor to an AC power outlet. Plug the 5VDC output power plug
3. Plug the power adaptor to an AC power outlet. Plug the 5VDC output power plug
into the DC jack of AT-LINE-EX Media Center.
4. Turn on the power of your source device that you are going to use.
5. Check the power of AT-LINE-EX. If the power LED light is not on, please press the
4. Turn on the power of your source device that you are going to use.
5. Check the power of AT-LINE-EX. If the power LED light is not on, please press the
power key to turn on the power of AT-LINE-EX.
6. Check the input indication LED at the front panel. Please press the button of input
6. Check the input indication LED at the front panel. Please press the button of input
source to choose input source. For example, if your are going to choose HDMI™
input 1, please press the key with “1” in the HDMI™
7. Use the “RES.” key to adjust the resolution.
8. Use IR Remote control for more control features.
7. Use the “RES.” key to adjust the resolution.
8. Use IR Remote control for more control features.