JVC KV-DT2000 User Manual

12

ENGLISH

You can browse through all the available programs, up to nine programs at a time.

Blank windows

The windows will start 

showing snapshots of different 

channels in sequence.

After a few seconds....

•  The unit does not work at all.

•  Reset the unit (see page 5).
•  Check the cords and connections.

•  “No Channel” appears on the monitor.

No channels have been preset.

•  No picture appears when you switch 

between functions.

Wait for a few seconds for the unit to return to TV 
mode.

•  Only sound can be heard and no 

picture is shown on the monitor.

•  Check the video cables connection.
•  This unit might be in radio mode. Press TV/RADIO 

to enter TV mode.

•  Monitor shows discontinuous, 

glitches, or mosaic pictures.

This is not a malfunction. Some broadcasters 
are using MPEG-2 signals which are subject to 
interference.

•  Only picture is shown on the monitor 

and no sound can be heard.

•  Adjust the sound to the optimum level.
•  Make sure the mute function is not activated (see 

page 5).

•  Check the audio cables connection.

•  The monitor screen goes blank and 

teletext page does not appear.

•  Wait for a few seconds for transmission time.
•  The monitor does not support teletext function.
•  Check with your local broadcaster for availability of 

this service.

•  No pictures appear on the Multi CH 

(Channel) display.

There may be no broadcast signal.

What appears to be trouble is not always serious. Check the following points before calling a service 
center.

EN02-13_KV-DT2000[E]f.indd   12

EN02-13_KV-DT2000[E]f.indd   12

9/22/05   6:55:09 PM

9/22/05   6:55:09 PM