TEAC 7250 User Manual
9
THE SET-UP PROCESS
Assuming you have connected a HDMI cable or Component Video cable between your set-top box
and you flat panel television screen, the following will automatically appear when using this product for
the first time. If no screen appears, unplug the HDMI cable and connect again. This will force the set-
top mode into this mode (i.e. it’ll automatically switch).
Assuming you have connected a HDMI cable or Component Video cable between your set-top box
and you flat panel television screen, the following will automatically appear when using this product for
the first time. If no screen appears, unplug the HDMI cable and connect again. This will force the set-
top mode into this mode (i.e. it’ll automatically switch).
Every 10 seconds, the video screen mode will change to a lower
resolution. If you can see this screen, then your television screen
accepts a higher level of high definition vision.
Press the
resolution. If you can see this screen, then your television screen
accepts a higher level of high definition vision.
Press the
key to accept the resolution provided by the set-top
box.
Once you have selected the resolution, the set-top box will ask you to accept it.
You must press the
blue key to accept your selection.
The following step-by-step screens will now appear.
The following screens are presented to you to complete the set-up process.
Press the key to go to the next screen.
Move the joystick to select your type of television screen.
Then press the key to go to the next screen.