Philips DCR 2021 User Manual
70
EN
6.10 Switching to analogue TV
The TV/STB key is used to switch between watching
digital channels through your receiver or watching
programmes through your TV set and standard analogue
channels.
While watching digital TV or listening to digital radio:
- Press TV/STB to switch to analogue TV/VCR/DVD.
- Press TV/STB again to revert to digital TV or radio.
digital channels through your receiver or watching
programmes through your TV set and standard analogue
channels.
While watching digital TV or listening to digital radio:
- Press TV/STB to switch to analogue TV/VCR/DVD.
- Press TV/STB again to revert to digital TV or radio.
6.11 Viewing teletext
Your receiver is not equipped with a teletext decoder.
To consult teletext pages, your TV set must be fitted
with teletext decoder and be connected to the “TV”
SCART socket of your receiver using the SCART cable
supplied. Refer to the user manual of your TV set to
check how to access teletext pages.
To consult teletext pages, your TV set must be fitted
with teletext decoder and be connected to the “TV”
SCART socket of your receiver using the SCART cable
supplied. Refer to the user manual of your TV set to
check how to access teletext pages.
6.12 How do I reset my
receiver in case of
unstable or frozen
picture?
unstable or frozen
picture?
1 Press the
button on the receiver front panel for
at least 5 seconds.Your Preferences settings will not
be lost.
be lost.
2 Release the button and wait for a stable front display
indication (i.e. LED either lit in orange for standby
mode or green for TV mode).You can then continue
with normal operation.
mode or green for TV mode).You can then continue
with normal operation.
DCR 2021_Premiere_indice 1b 7/03/06 11:45 Page 70