Philips DCR 2021 User Manual

Page of 44
84
EN
11.1 Restoring factory settings
Press MENU, then 6, and then 4.
Press the red colour key.
If you restore the factory settings of your receiver, you lose all the settings you
stored previously and have to restart from first installation.
To restore your receiver factory settings, refer to paragraph 10.5.4.
11.2 Changing the remote control
configuration
If you have other items of equipment in your home and the remote control of the
Philips receiver interferes with them, you can change the setting of the remote
control. For this you must change the setting of both your receiver and remote
control.
11.2.1 To change the setting of your receiver
Refer to paragraph 10.3.1.
11.2.2 To change the configuration of your remote control:
Simultaneously press number keys 1 and 3 and hold them for at least 3 seconds.
Simultaneously release the two keys.
Enter the new setting within the next 60 seconds:
• 5 for alternative setting corresponding to setting 38
• 1 for the default factory setting corresponding to setting 39.
Press OK.
If the batteries are removed while a key is being pressed, the default factory setting
(39) is restored.
11.3 VCR/DVD Recorder Control
11.3.1 Connecting your receiver for Video/DVD Recorder
Control
Recorder control allows automatic recording without requiring you to programme
your VCR or DVD recorder. All you need to do is set a recording timer for your VCR
or DVD recorder to start/stop recording.
11 Other settings
DCR 2021_Premiere_indice 1b  7/03/06  11:45  Page 84