Motorola HDT101 User Manual
33
Connecting your A/V Receiver, VCR and High Definition TV
1
1
Connect the component video cable supplied with the HDT101 to the
Y, Pb, and Pr connectors on your TV and HDT101.
Y, Pb, and Pr connectors on your TV and HDT101.
2
Connect a coaxial audio cable to the
S
/
PDIF OUT
connector on the
HDT101 and the
SPDIF
input connector on the A/V receiver.
3
Connect a video cable to the
VIDEO
connector on the HDT101 and
the
CABLE
/
TV VIDEO
connector on the A/V receiver.
If your equipment supports it, S-Video connections may be used in
place of the standard composite video connections. In most cases,
S-Video offers a higher level of standard definition video quality than
composite video.
place of the standard composite video connections. In most cases,
S-Video offers a higher level of standard definition video quality than
composite video.
4
Connect a stereo audio cable to the
VCR AUDIO OUT R
and
L
connectors on the A/V receiver and the
INPUT AUDIO R
and
L
connectors on the stereo VCR.
When using the digital audio output (
S
/
PDIF OUT
), the left / right
baseband audio connections to the A/V receiver are not needed.
5
Connect a stereo audio cable to the
OUTPUT AUDIO OUT R
and
L
connectors on the stereo VCR and the
VCR AUDIO IN R
and
L
connectors on the A/V receiver.
6
Connect a video cable to the
INPUT VIDEO
connector on the stereo
VCR and the
VIDEO VCR OUT
connector on the A/V receiver.
7
Connect a video cable to the
OUTPUT VIDEO
connector on the stereo
VCR and the
VIDEO VCR IN
connector on the A/V receiver.
8
Connect a video cable to the
INPUT VIDEO
connector on the stereo TV
and the
TV
/
MONITOR OUTPUT VIDEO
connector on the A/V receiver.
To switch between viewing input from your VCR and input from your
HDT101, change your TV’s video inputs from the Component input to the
Video input.
HDT101, change your TV’s video inputs from the Component input to the
Video input.