Motorola HDT101 User Manual
39
Problem Possible
Solution
After installing the
HDT101 and running
Auto Scan, not all the
available channels
have been added
HDT101 and running
Auto Scan, not all the
available channels
have been added
Add the missing channels manually. See “Adding a
Channel” in the On-Screen Menu section.
Channel” in the On-Screen Menu section.
You may have to reposition your antenna to receive all
the local channels, especially if different transmit
towers are being used by the networks. For more
information, log on to the following web site:
the local channels, especially if different transmit
towers are being used by the networks. For more
information, log on to the following web site:
Cannot lock on a
signal when manually
adding a channel
signal when manually
adding a channel
Check the antenna and make sure it is aligned to the
correct direction.
correct direction.
Check the signal’s strength and quality. Press
INFO
to
display the i-Banner and review the color bars at the
bottom of the window. If any of the bars are red, adjust
your antenna and try again.
bottom of the window. If any of the bars are red, adjust
your antenna and try again.
No Closed Captions
Verify that the channel you are watching carries closed
captioning.
captioning.
Cannot receive
channels after
changing the
HDT101’s location
channels after
changing the
HDT101’s location
You may have to reposition your antenna. Consult the
following web site:
following web site:
On-Screen Error Messages
Bad Signal
Verify that the antenna cable is connected properly
(hand-tighten if necessary).
(hand-tighten if necessary).
Check the antenna and make sure it is aligned to the
correct direction.
correct direction.
Scrambled Channel
The program you are watching is scrambled by the TV
station. The program cannot be decoded by the
HDT101.
station. The program cannot be decoded by the
HDT101.