Philips FTR9964 User Manual

13

Select the menu items in the Sound menu with the cursor
up/down and adjust the settings with the cursor left/right.
Remember, control settings are at normal mid-range levels when
the bar scale is centered.

Volume
This control allows you to adjust the volume level.

Treble
Treble attenuates or amplifies the high-frequency response of
the audio output signal.

Bass
Bass attenuates or amplifies the low-frequency response of the
audio output signal.

Balance
This control allows you to adjust the balance of the right and
left speaker’s sound output.

Headphone volume
This control allows you to adjust the volume level of the
headphone.

Sound mode 
Surround Mode can only be selected when the sound of the TV
channels is stereo.
When 

is selected, it seems as though the

loudspeakers are spread further apart from one another.
Note: In case you have selected Center Mode Yes in the Settings
menu (see p. 11), then the items Treble, Bass and Balance are not
selectable.

Sound

Volume

Treble

Bass

Balance

Headphone volume

Sound mode

Alt Audio

(Mono/Stereo)

(Audio only)

Auto sound

TV

Color enhancement (not available for HD sources)
When activated, this feature automatically controls green
enhancement and blue stretch. It makes the colors more
vivid.

&

Press the cursor right to enter the list.

é

Select 

or 

in order to activate/de-activate Color

Enhancement with the cursor right.

“

Press the cursor left to return to the picture menu.

Auto picture
This menu item performs the same as the 

a

item on the remote control. See Use of the Remote
Control, p. 7.

&

Press the cursor right to enter the list.

é

Select a predefined picture setting with the cursor
up/down.

“

Press the cursor left to return to the picture menu.

Auto picture settings will be set to 

if the following

settings are changed manually: contrast, brightness, color,
sharpness, dynamic contrast, color enhancement or DNR.

This menu item performs the same as the q button on
the Remote Control. See Use of the Remote Control, p. 5.

Alt Audio
When you tune a channel where SAP (Second Audio Program)
is available, you can toggle between 

and 

.

Press the cursor right to enter the list and make your preferred
audio selection with the cursor up/down.
If SAP is not available, only Main is selected.

Mono/Stereo  (Only selectable in case of stereo transmission)
Select 

or 

with the cursor left/right.

When 

has been selected, the television will reproduce

any stereo broadcast signal it receives.
If Stereo is not present on a selected channel and the TV is
placed in Stereo mode, the sound coming from the set will
remain monaural.
Your selection is stored per TV channel.

Audio only (disabled in VGA mode)
This control enables you to blank the TV picture if the monitor
is used as center speaker in a configuration with an audio
receiver.
Select 

n to only hear the sound and to switch off

the picture.

Auto Sound
This menu item performs the same as the 

item M on

the remote control. See Use of the Remote Control, p. 7.

&

Press the cursor right to enter the list.

é

Select a predefined sound setting with the cursor up/down.

“

Press the cursor left to return to the sound menu.

To exit the sound menu branch, press the diagonal cursor
button upright, or upleft or press the Ï menu button.

1009.4 gb  08-07-2002  11:06  Pagina 13