Philips FTR9964 User Manual
4
Preparation
Do not insert the power plug in a wall socket before
all connections are made.
all connections are made.
&
Place the receiver box wherever you want, but make sure
that air can circulate freely through the ventilation slots. Do
not install the receiver box in a confined space such as a
book case or a similar unit.
To prevent any unsafe situations, no naked flame sources,
such as lighted candles, should be placed on or in the
vicinity. Avoid heat, direct sunlight and exposure to rain or
water.
The equipment must not be exposed to dripping or
splashing and no objects filled with liquids, such as vases,
should be placed on it.
that air can circulate freely through the ventilation slots. Do
not install the receiver box in a confined space such as a
book case or a similar unit.
To prevent any unsafe situations, no naked flame sources,
such as lighted candles, should be placed on or in the
vicinity. Avoid heat, direct sunlight and exposure to rain or
water.
The equipment must not be exposed to dripping or
splashing and no objects filled with liquids, such as vases,
should be placed on it.
é
Connect the antenna cable 1 and the
VGA
cable with
trailing audio cinch connectors 2 as shown in the inside
frontcover of this handbook.
Make sure all screws of the cable 2 are tightened well.
frontcover of this handbook.
Make sure all screws of the cable 2 are tightened well.
TV receiver box with speakerless monitor
In case you connect your TV receiver box with a speakerless
monitor, and without having connected an audio receiver, all
references made in this instruction book to sound reproduction,
volume control, and audio connections, are not applicable (except
for a headphone connection).
The buttons on the remote control referring to sound have no
function either.
In case you connect your TV receiver box with a speakerless
monitor, and without having connected an audio receiver, all
references made in this instruction book to sound reproduction,
volume control, and audio connections, are not applicable (except
for a headphone connection).
The buttons on the remote control referring to sound have no
function either.
“
To connect your computer, see the separate supplied
instruction manual with your monitor.
To connect other accessory devides, see p. 19.
In order to obtain the best result, please use only the
supplied antenna cables between the receiver box and
videorecorder, and between videorecorder and antenna
connector.
instruction manual with your monitor.
To connect other accessory devides, see p. 19.
In order to obtain the best result, please use only the
supplied antenna cables between the receiver box and
videorecorder, and between videorecorder and antenna
connector.
‘
Insert the power cord supplied 3 into the
MAINS
at the
back of the monitor and the power cord 4 at the back of
the receiver. Put both in the wall sockets with an AC power
supply of 110 V. Consult your local dealer if your AC power
supply is different.
Please, only use the power cord 3 supplied with the
monitor, for the monitor, and use the power cord supplied
with the receiver, only for the receiver.
the receiver. Put both in the wall sockets with an AC power
supply of 110 V. Consult your local dealer if your AC power
supply is different.
Please, only use the power cord 3 supplied with the
monitor, for the monitor, and use the power cord supplied
with the receiver, only for the receiver.
(
Remote control: Remove the cover of the battery
compartment.
Insert the 2 batteries supplied (Type R6AA-1.5V).
compartment.
Insert the 2 batteries supplied (Type R6AA-1.5V).
The batteries supplied do not contain the heavy metals mercury
and cadmium. Nevertheless in many areas exhausted batteries
may not be disposed of with your household waste. Please check
on how to dispose of batteries according to local regulations.
and cadmium. Nevertheless in many areas exhausted batteries
may not be disposed of with your household waste. Please check
on how to dispose of batteries according to local regulations.
Press the TV button (green indicator) to be sure your
remote control is in the TV mode.
remote control is in the TV mode.
§
Turn the receiver on : Press the power button A at the
right side of the monitor and the one on the front of the
receiver box.
A green indicator and the screen light up.
right side of the monitor and the one on the front of the
receiver box.
A green indicator and the screen light up.
The green indicator blinks every time you press a button on the
remote control.
When you turn on your set for the first time, the menu
remote control.
When you turn on your set for the first time, the menu
LANGUAGE
automatically appears on the screen. Alternately
the explanation appears in different languages.
Preparation
4 ft
min.
B
S
l
q
Q
CBL
TV
SOURCE
SELECT
VCR
AMP
POWER
SAT
HD
DVD
CD
CC
TV
a
NATURAL
MOTION
DNR VCR prog
EXIT
INFO+
R6AA - 1,5V
1009.4 gb 08-07-2002 11:06 Pagina 4